Hobbs Roof Pros provides professional metal roofing in Hobbs, NM for residential and commercial properties across southeastern New Mexico. Metal is the native building language of the oil patch. Every yard, shop, and pump station between here and the state line wears it, so people assume the panel on a service building is the right panel for a house. Often it is not.
The distinction we care about is how the panel is attached. An exposed-fastener profile is honest, cheap, and entirely appropriate on a shop or a barn, where you can walk it once a year and drive a screw. On a dwelling with a low pitch and a long run, the thermal movement in this climate works those holes for two decades and the building owner never sees the result until a ceiling reports it.
For houses we push toward mechanically seamed Galvalume on expansion clips, which lets the panel move without loading a fastener in shear. It costs meaningfully more than an exposed-fastener roof and less than people fear. On a 4:12 or steeper Hobbs roof with simple geometry it is close to a lifetime assembly, and we will say when the geometry is complicated enough to argue against it.
There is a Hobbs-specific problem with metal that nobody mentions in a brochure. Painted panels are marketed on the assumption that rain rinses them, and this county does not supply enough rain to do it. Fines off caliche roads, pad dust, and field grit collect in the pans and sit there for most of the year, holding whatever moisture the dew leaves behind.
So we specify for the dust rather than against it. Bare or lightly coated Galvalume handles the condition better than a dark painted finish, panel pitch matters more than the brochure suggests, and we tell owners to hose the pans and the eave once a year. That single habit does more for a metal roof here than any upgrade you can buy at purchase.
Retrofitting metal over an existing shingle roof is a real option on the older cohort and we will price it honestly. A hat-channel sub-purlin system spanning the old covering avoids a tear-off and adds a vented air gap that measurably drops attic temperature. It only works where the existing deck is sound, and finding that out is a twenty-minute job we do before quoting rather than a discovery we make after the contract has been signed.
Our licensed and insured team brings the right materials and equipment to every job — open metal valleys formed in 26-gauge Galvalume, high-temperature synthetic underlayment rated for hot decks, caliche fines cleared from scuppers and downspout boots, granule-surfaced SBS cap sheet set in cold adhesive, unvented roof assemblies built with above-deck polyiso, mechanically seamed Galvalume panels riding on expansion clips — and backs the work with a written workmanship warranty. We serve Hobbs and nearby communities including North Hobbs, Lovington, Eunice, Jal.
What We Handle
Everything our metal roofing in Hobbs covers
One crew, one point of contact, and the full range of metal roofing work in Hobbs, NM. If it is on this list we do it in house rather than handing it to a subcontractor:
- metal roofing Hobbs NM
- standing seam metal roof Lea County
- Galvalume roof New Mexico
- R panel metal roof Hobbs
- exposed fastener metal roof problems
- metal roof cost Hobbs NM
- metal re-roof over shingles
- metal roofing contractor Lovington NM
- oil field metal building roof
- metal roof panel coating dust
- residential metal roof Eunice NM
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Hobbs services.
Materials, equipment and how we do metal roofing
The difference between metal roofing that lasts and metal roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with open metal valleys formed in 26-gauge Galvalume, high-temperature synthetic underlayment rated for hot decks, caliche fines cleared from scuppers and downspout boots, granule-surfaced SBS cap sheet set in cold adhesive, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Hobbs job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in southeastern New Mexico means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do metal roofing outside Hobbs
Hobbs Roof Pros covers Hobbs and the surrounding communities of southeastern New Mexico. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Metal Roofing in North Hobbs, NM — Lea County, population 6,529
- Metal Roofing in Lovington, NM — Lea County, population 11,668
- Metal Roofing in Eunice, NM — Lea County, population 3,056
- Metal Roofing in Jal, NM — Lea County, population 2,202
- Metal Roofing in Tatum, NM — Lea County, population 706
- Metal Roofing in Monument, NM — Lea County, population 213
Start on the Hobbs Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Hobbs Chooses Hobbs Roof Pros
- ✓We price the roof around the decade the house was built, because two thirds of Hobbs predates 1980 and the deck under it varies block by block.
- ✓Deck repair is a named unit price in the estimate rather than a change order discovered on the second morning of a tear-off.
- ✓We will talk you out of a coating, a claim, a skylight or a full gutter wrap when the honest answer is to spend nothing.
- ✓Material comes from Midland, Lubbock or El Paso, so we order before tear-off and plan the schedule around the real wait.
The standards behind metal roofing
Quality here is not a matter of opinion — it is written down. The metal roofing work we do in Hobbs follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every metal roofing project in Hobbs gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free metal roofing free estimate in Hobbs, or request a quote and we'll get right back to you.